do not scale from this print no of positions all positions available -02 thru -50 (use body: sfm-xx-d-xx-x) body specification -d: double row lead style -01: through hole (use contact: c-44-01-xxx) (see fig. 1, sht. 1) -02: surface mount (use contact: c-44-02-xxx) (see fig. 2, sht. 2) -03: straight modified (use contact: c-44-03-xxx) (see fig. 1, sht. 1) -l1: through hole (low insertion) (use contact: c-61-01-xxx) (see fig. 1, sht. 1) -l2: surface mount (low insertion) (use contact: c-61-02-xxx) (see fig. 2, sht. 2) -l3: straight modified (low insertion) (use contact: c-61-03-xxx) (see fig. 1, sht. 1) -t1: through hole (phos bronze) (use contact: c-119-01-xxx) (see fig. 1, sht. 1) -t2: surface mount (phos bronze) (use contact: c-119-02-xxx) (see fig. 2, sht. 2) options (leave blank for standard and use sfm-xx-d) -n: no polarization notch (use sfm-xx-d-xx-n) -a: alignment pin (use sfm-xx-d-a-x) (see fig. 4, sht 2) -lc: locking clip (see fig. 6, sht. 3 & note 8) (available on all leads) -p: pick and place pad (see fig. 5, sht 2) -tr: tape & reel (see sht 4) (not available with -sd option) -k: polyimide film pad (.005[0.13] thickness with silicone adhesive) (see fig. 3, sht. 2) (use k-500-300) -sn: solder nail for .062 board (sfm-xx-d-sn and wt-27-01-t) (available with lead style -02, -l2 & -t2) (not available with -a & -lc) -sn2: solder nail for .093 board (sfm-xx-d-sn and wt-27-02-t) (available with lead style -02, -l2 & -t2) (not available with -a & -lc) **-sd: screw down for .062 board (only available with -01 & -02 lead style) (not available with options -n, -a, -lc, -ra, -sa, -wt, -re1, -re2, sn, or sn2 (sfm-xx-d-sd, cps-rr-xx-xx-x & accrt-01) (see fig. 8, sht. 3) -s: 30" selective gold in contact area, matte tin on tail -f: 3" flash selective gold in contact area, matte tin on tail -h: 30" heavy gold in contact area, 3" gold on tail -l: 10" light selective gold in contact area, matte tin on tail -stl: 30" selective gold in contact area, tin/lead (90/10+/-5%) tail (only available on -02 or -l2 leadstyles) -sm: 30" selective gold in contact area, matte tin on tail -fm: 3" flash selective gold in contact area, matte tin on tail -lm: 10" light selective gold in contact area, matte tin on tail plating specification .120 ref 3.05 .050 ref 1.27 * .145 ref 3.68 * .020 ref 0.51 * .080 ref 2.03 .050 ref 1.27 *: dimensions n/a for -n option c l c l c l 02 01 (no. of pos x .050[1.27]) + .155[3.94] ref (no. of pos x .050[1.27]) + .015[0.38] ref .180 ref 4.57 "a" (see table 1) "b" ref (no. of pos x .050[1.27]) - .050[1.27] ref .110 ref 2.79 1 max sway (typ) "a" "a" .015 ref 0.38 .005 ref 0.13 .050 1.27 2 max sway (typ) section "a"-"a" c-xx-01-xxx (see note 5) sfm-xx-d-xx-x c l c fig 1 through hole/straight modified sfm-1xx-xx-xxx-d-xxx c4 c3 c2 c1 cp (** = not released for production) cp sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .050 x .050 socket strip double row assembly by: sfm-1xx-xx-xxx-d-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing jordan 12/11/89 4 1 sheet scale: 3:1 insulator: lcp, color: black contact: tiger eye = becu tiger eye lite = phosphor bronze f:\dwg\misc\mktg\sfm-1xx-xx-xxx-d-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. minimum pushout force: .5 lb. 3. coplanarity: .004[0.10] = pos 05 thru 26 .006[0.15] = pos 27 thru 50 4. tube all positions. parts to be tubed with notch going with arrow. 5. pins can be oriented in any direction; both rows must face same way. 6. see notch for proper orientation. 7. maximum pin height variation: .003[0.08]. 8. due to high amount of insertion force needed, the -lc option is not compatible with auto placement. samtec recommends manual placement for all assemblies with the -lc option. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision cp
"b" "b" sfm-xx-d-xx-x (no. of pos x .050[1.27]) - .050[1.27] ref (tol accum .005[0.13] over 50 pos) 2 max sway (typ) 02 01 c-xx-02-xxx .161 ref 4.09 .185 - .005 + .002 4.70 - 0.127 + 0.051 (see note 7) 2 4 section "b"-"b" fig 2 -x2: surface mount (same as fig 1, different as shown) see note 2 .1575 .0050 4.000 0.127 .019 .010 0.48 0.254 "s" (see note) "r" (see note) fig 3 -k: polyimide film pad (same as fig 1, different as shown) note: "r" = used measured dimension ref "s" = {("r" - .1575[4.000])/2}.020[0.51] .190 4.83 .062 1.57 "a" .010[0.25] (see table 2) .394 10.01 ref see note ppp-02 .225 5.72 ref r ref (no. of pos x .050[1.91]) + .075[0.38] ref (no. of pos x .050[1.91]) + .125[3.18] ref .050 1.27 ref sfm-xx-d-a-x .050 1.27 ref fig 4 -a: alignment pin (same as fig 1, different as shown) c5 c7 c6 fig 5 -p: pick and place pad (pad to be oriented a shown for 5-12 position parts) (for 13-50 position parts, pad may be oriented in either direction) (same as fig 1, different as shown) sheet of .050 x .050 socket strip double row assembly by: sfm-1xx-xx-xxx-d-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing jordan 12/11/89 4 2 sheet scale: 3:1 revision cp f:\dwg\misc\mktg\sfm-1xx-xx-xxx-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
"c" ref (no of pos x .050[1.27] + .185[4.70] ref (no of pos x .050[1.27] + .085[1.27] ref 2 max sway (typ) "c" "c" wt-27-xx-t sfm-xx-d-sn .026 0.66 ref flush to .005[0.13] above section "c"-"c" .056 ref 1.42 .065 ref 1.65 (no of pos x .050[1.27] + .075[1.91] ref sfm-xx-d-lc-x lc-05-tm .010 ref 0.25 (no of pos x .050[1.27] + .600[15.24] ref .070 1.78 ref .081 2.06 'e' sfm-xx-d-sd cps-rr-m2-01-x c9 position 1 indicator (no of pos x .050[1.27] + .360[9.14] .218 5.52 ref 01 02 .335 8.50 ref .145 3.68 c8 .012 0.30 ref .114 ref 2.90 detail 'e' scale 6 : 1 accrt-01 fig 7 -snx: solder nail (same as fig 1, different as shown) fig 6 -lc: locking clip (same as fig 1, different as shown) (available in all leads) fig 8 -sd: screw down (same as fig 7, different as shown) (not released for production) sheet of .050 x .050 socket strip double row assembly by: sfm-1xx-xx-xxx-d-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing jordan 12/11/89 4 3 sheet scale: 3:1 revision cp f:\dwg\misc\mktg\sfm-1xx-xx-xxx-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
pt-1-24-13-09 pt-sfm004-x1-x3-d pt-sfm004-x1-x3-d 2.205 56.00 .630 16.00 "d" "d" section "d"-"d" scale 2 : 1 (see note 6) pt-1-24-01-60 5 pos -01 and -03 lead styles may be tubed using pt-1-24-15-09, tp-24-02 unwinding direction packaging view package parts in tubes as shown (see note 4) packaging view -tr: tape and reel cn sheet of .050 x .050 socket strip double row assembly by: sfm-1xx-xx-xxx-d-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing jordan 12/11/89 4 4 sheet scale: 1.5:1 revision cp f:\dwg\misc\mktg\sfm-1xx-xx-xxx-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
